loading
For non-contact power charging of smartphones or products that use batteries
Equipped with the mass production line of shielding materials for Tx and Rx, and coil assembly. Own materials and products can be selected depending on the magnetic induction method and resonance method among charging methods.
Cost competitiveness and fast production response capability by internal production (coil to assembly) of shielding materials (metal, ferrite).
Application
Applies to various products such as smartphones, automobiles, wearable devices, and furniture.
| 제품명 | 사진 | Inductace(μH) | Length[mm] | Width[mm] | Thickness [mm] |
Number of turns per layer | Number of layer | ||
|---|---|---|---|---|---|---|---|---|---|
| Outer | Inner | Outer | Inner | ||||||
| A6 type |  |
side coil : 12.5 center coil : 11.15 |
53.2±0.5 | 27.5±0.5 | 45.2±0.5 | 19.5±0.5 | 1.5±0.5 | 12 turns | 1 |
| A11 type |  |
coil 6.3 | 44±1.5 | 20.5±0.5 | 44±1.5 | 20.2±0.5 | 2.1±0.5 | 10 (5 bifilar turns) |
1 or 2 |
| 제품명 | 사진 | Inductace(μH) | Length[mm] | Width[mm] | Thickness [mm] |
Number of turns per layer | Number of layer | ||
|---|---|---|---|---|---|---|---|---|---|
| Outer | Inner | Outer | Inner | ||||||
| MPA2 type |  |
coil : 10.0 | 48.0±0.5 | 19.0±0.5 | 48.0±0.5 | 19.5±0.5 | 1.1±0.3 | 12 turns | 1 |
| MPA6 type |  |
side coil 6.3 | 49.0±1.0 | 26.0±1.0 | 44.0±1.0 | 22.0±1.0 | 1.1±0.2 | 11 | 1 |
| center coil : 12.5 | 46.0±1.0 | 21.0±1.0 | 49.5±1.0 | 25.5±1.0 | 1.1±0.2 | 12 | 1 | ||
236, Munmakgongdan-gil, Wonju-si, Gangwon state
TEL : +82-33-730-1700
COPYRIGHT(C) 2019 TODA materials Inc. ALL RIGHT RESERVED.
